APT Mfg Solutions Mod-Weld Cobot MAC Cart

The MOD-WELD is designed and manufactured exclusively around the FANUC CRX-10iA/L industrial collaborative robot. The CRX models come from a long line of reliable FANUC products that are extremely easy to setup, program, and operate – even if it’s your first robot. You pick the choice of power supply: Miller Auto-continuum or Fronius TPS/i. - Mobile Cart welded construction powder coat finish - FANUC CRx Collaborative Robot with APT Clever Torch teach button software package ready to teach and weld - Lockable teach tablet holder - APT Clever Torch for ease of movement and teaching the robot. - Top plate 40” x 58-1/2” with 16mm 2” center holes for clamping and fixture hold down - 6” Casters for ease of movement - Ready to accept side cart and accessories - Base model is configured to weld steel (hard metal), soft metals require additional options

Power Source Choice of: Miller Auto-Continuum with torch and wire feed Fronius TPS/i with torch and wire feed Choose Your Power Supply Fronius

400i TPSi, air-cooled torch for welding steel. Comes with .035 wire feed rollers 3PH Power. Optional consumable or replacement parts up to 1/16 400i-C/500i-C TPSi, cooler & water cooled torch. Comes with .035 wire feed rollers 3PH Power. Optional consumable or replacement parts up to 1/16 500C-C Auto-Continuum™ or Auto-Deltaweld™, cooler & water-cooled torch Comes with .035 wire feed rollers. 3PH Power. Optional consumable or replacement parts up to 1/16

400i-C-S/500i-C-S TPSi, cooler, water-cooled torch, push/pull CMT ready package for both steel (hard wire) & aluminum (soft wire) Equipped with 3/64 start-up consumables & drive wheels for aluminum welding. 3PH Power

Miller

350C/D Auto-Continuum™ 3PH or Auto-Deltaweld™ 1PH, air-cooled torch for welding steel. Comes with .035 wire feed rollers. Optional consumable or replacement parts up to 1/16 350D

500C-C/500D-C Auto-Continuum™ or Auto-Deltaweld™, cooler & water-cooled torch Comes with .035 wire feed rollers. 3PH Power. Optional consumable or replacement parts up to 1/16

500C-C-S Auto-Continuum™ 500, cooler, water-cooled FANUC Servo Torch to pull the wire. Equipped with 3/64 start-up consumables & drive wheels for aluminum welding. 3PH Power

Software Options

Fronius

PMC Fronius Pulse Multi-Control, regulated, low-spatter droplet detachment. At the same time, PMC generates a stable arc which results in perfect control of the weld pool. LSC Fronius Low Spatter Control, achieves high-quality weld seams with minimal spattering and increased deposition rate, as the LSC principle is based on the short circuit occurring at a low current level. This leads to soft reignition and a stable welding process. CMT Fronius Cold Metal Transfer (CMT) welding, only available in CMT ready machines. Ideal for high performance welding in the areas of thin materials, brazing, visual aesthetics, cladding & WAAM welding consisting of all ranges of materials from Aluminums, Steels, Coppers, Titanium, & Nickel alloys

FANUC

 TPW FANUC Thick Plate Weld Package is Touch Sensing & Through Arc Seam Track in one package. This robot/cobot software is available on both Fronius & Miller