TCC-50 RL & Coil Tube Cutting Center
TCC-50 RL & Coil Tube Cutting Center
orCall 508-277-9598
Description
TCC-50 RL & Coil Automatic Tube Cutting Center
If you need to cut tubes from both coil and from rackloading systems for straight length tubes, this machine is the optimum solution, offering both capabilities.
With this machine you can cut straight tube diameters 6–45 mm (¼’’ – 0.866”) and coil tubes 1,5–22 mm (0.06” – 0.866’’) in a range of materials such as copper, aluminum, stainless steel.
Typical application areas are in automotive and heat exchanger industry, etc. where good cutting quality and superior production speed are needed.
Specifications
| Manufacturer | T-DRILL |
| Condition | New |
| Cutting range | From coil: Ø1,5–22 mm | Ø0.06'' – 0.866’’ Straight tubes: Ø6–45 mm | Ø0.236'' – 1.772'' |
| Wall thickness | From coil: 0,3–3 mm | 0.012'' - 0.12'' Straight tubes: 0,.4–2,5 mm | 0.016'' - 0.1'' (depending on the tube material) |
| Material | Copper, Aluminium, Steel, Stainless Steel, CuNi, Brass |
| Repeating accuracity | +/- 0.1 mm/stroke |
| Min. cut lengths | 3 x O.D. |
| Typical production rates | 800–2200 pcs/h depending on cut length, material and required cut quality |
| Main fuse | Min. 3 x 16A Maks.3 x 63 A |
| Noise level | 80 dBA |
| Pipe diameters | 1,5–22 mm, 8–50,8 mm | .060″ – 0.866”, 0,315″ – 2″ |
| Pipe material | Aluminum, Copper, Stainless steel, Steel |
| Machine type | Industrial machines |
| Process | Cutting |
| Mains supply | 200-240 V / 50 Hz /60 Hz, 3-phase 400-480 V / 50 Hz /60 Hz, 3-phase |