SWIFT-JET PRO
Plasma CuttersThe Swift-Jet Pro is a feat of incredible engineering; a package that combines the ability to cut a wide range of materials with superb accuracy and repeatability, to create excellent results. Exceptional quality, phenomenal value for money, and the robust build of our CNC plasma tables have all come together to create the Swift-Jet Pro, the waterjet table that is setting the standard.
Footprint
3778mm x 2114mm (148″ x 83″)
Table weight
410kg (904 lbs)
Tank weight
680kg (1500lbs)
Operating weight
(table, tank and water) 3590kg (7900lbs)
Height
Water only – 1362mm (53″)
(allow 3000mm (118″) of height for the HP whip)
Water with abrasive – 1600mm (63″)
(allow 3000mm (118″) of height for the HP whip)
Cutting envelope
2500mm x 1250mm (8’ x 4’)
Z-Axis travel
110mm (4.3″)
Maximum supported
material load
400kg/m2 (274lbs/sq. ft)
Input voltage
110-230v (6A-4A)
Speed 1800mm/m max rapid (708ipm)
Linear positional accuracy
0.2mm/m (0.002″/ft)
Repeatability
0.4mm/m (0.005″/ft)
Ballbar circularity
0.3mm/m (0.003″/ft)
Drive description
Triple sealed linear bearings with scrapers on x and y axis and bellow on z axis ball screw (to keep out garnet and cutting particulate) – Dual drive Y-axis incorporating hybrid servo motors – Linear rail on all axis
Gantry height
230mm (9″)
Maximum material thickness
Water only 100mm (4″)
Abrasive 50mm (2″)
Input air pressure
6 bar (90psi)
Simply the industry standard for waterjet cutting
Software offers advanced speed optimization allowing the user to combine fast production with an excellent cutting result on a wide range of materials
The Kerf width is dynamically changed depending on actual speed to help maintain incredible accuracy no matter what you are cutting
Machinability calculator – use to determine the optimum cutting speeds on materials not held in the material library
Abrasive toolsets built in
3-axis CAM
Customisable cutting rules – Optimise cutting parameters for best cutting performance
53 shape parametric library comes as standard
Make estimations for cutting cost and material cost
View job reports in Word or PDF formats
Customisable toolsets – Modify or create toolsets for new materials
Create quick access commands for personalised fast navigation within the software
https://igems.se/cadcam/
Options
Dynamic nesting
Ability to convert all TrueType fonts to usable geometrical information using the ImageTracer command
Also generate new geometry from a camera or scanner device or import a picture then create a new layer and draw over the picture to create new geometry
Create geometry from an old CNC file with the NC-Reader
Geometry clean up corrects double lines, overlapped objects or gaps between objects